Digital Pirani Vacuum Gauge – DPRG-1GH-SP (DECIMAL DISPLAY)
The UVS Model DPRG series Vacuum Pirani Gauge Controller displays vacuum pressure as measured from a S-PR-GH sensor tube. It displays vacuum measurements based on thermal conductivity of gases. The Model DPRG-1GH-SP unit covers the range from 0.001 m.Bar to 20 m.bar, and controls relay with independent set point.
|Number of sensor channels
||1000 mBar to 0.001mBar.
||20 mBar to 0.001mBar.
|Units of Display
|Vacuum Gauge Head
||S-PR-GH sensor tube
||+2 to +50 deg. Celsius
||4-digit bright red LED, 14 mm high
|VAC and ATM Adjust
||adjusted by trim pot at the signal conditioner PCB.
|Process control set points
|Process Control Relays
||One relay output, potential free contacts; independent available through the DB15 accessory connector on the rear panel
||Only for set points
||universal power supply, input voltages from 90 ~ 264VAC 50/60 Hz
||¼ DIN 92 x 92 mm (3.62” x 3.62″)
||not for use with explosive or corrosive gases
||92mm X 92mm X 110mm Depth
|Optional outputs on request
||RS485, 0 -10V Dc analog output
Features at a Glance : ■ Measurement range 0.001 to 20 mbar ■ Space saving rugged design- 1/8 DIN console ■ Space saving rugged design- 1/8 DIN console ■ Mounts in any orientation ■ brass body measuring cell with metal-sealed feed through ■ with universal power supply – input voltage from 90 ~ 264VAC, frequency 47 ~ 440Hz
Applications: ■ Controlling high vacuum systems ■ Fore vacuum pressure monitoring ■ Safety circuits in vacuum systems ■ General vacuum measurement & control in the fine and rough vacuum range.
Unique Vacuum Solutions offers a convenient recalibration service to help users of vacuum measurement pirani/ thermocouple/ full range gauges to maintain all of their vacuum gauges in Certified and peak condition, regardless of the original manufacturer. All makes of vacuum gauges can also be calibrated / repaired if required.
The calibration certificates are available only on request at additional cost. Pl contact before ordering.