DPRG-2GH-SP

Sale!

DPRG-2GH-SP

0.00

The UVS Model DPRG series Vacuum Pirani Gauge Controller displays vacuum pres­sure as measured from a S-PR-GH sensor tube. It displays vacuum measurements based on thermal conductivity of gases. The Model DPRG-2GH-SP unit covers the range from 0.001 mbar to 20 mbar, and controls relay with independent set point.

It is a dual channel gauge, channel selection from front bezel membrane switch.

Description

Digital Pirani Vacuum Gauge – DPRG-2GH-SP

The UVS Model DPRG series Vacuum Pirani Gauge Controller displays vacuum pres­sure as measured from a S-PR-GH sensor tube. It displays vacuum measurements based on thermal conductivity of gases. The Model DPRG-2GH-SP unit covers the range from 0.001 mbar to 20 mbar, and controls relay with independent set point.

It is a dual channel gauge, channel selection from front bezel membrane switch.

TECHNICAL SPECIFICATIONS

Number of sensor channels TWO
Display Range 1000 mBar to 0.001mBar.
Measuring Range 20 mBar to 0.001mBar.
Units of Display m.Bar
Vacuum Gauge Head S-PR-GH sensor tube
Temp. Range +2 to +50 deg. Celsius
VAC. Display 4-digit bright red LED, 14 mm high
Channel selection Through front panel selection switch
VAC and ATM Adjust adjusted by trim pot at the signal conditioner PCB.
Process control set points Two
Process Control Relays Two relays,  potential free contacts; independent                              available through the DB15 accessory connector on the rear panel
Nonvolatile Memory Only for set points
Operating Voltage universal power supply, input voltages from 90 ~ 264VAC 50/60 Hz
Mounting ¼  DIN 92 x 92 mm (3.62” x 3.62″)
Environmental Considerations not for use with explosive or corrosive gases
Overall dimensions 92mm X 92mm X 110mm Depth
Optional outputs on request RS485, 0 -10V Dc analog output

Features at a Glance

Measurement range 0.001 to 20 mbarSpace saving rugged design- 1/8 DIN consoleSpace saving rugged design- 1/8 DIN consoleMounts in any orientationbrass body measuring cell with metal-sealed feed throughwith universal power supply – input voltage from 90 ~ 264VAC, frequency 47 ~ 440Hz

Applications

■ Controlling high vacuum systems ■ Fore vacuum pressure monitoring ■ Safety circuits in vacuum systems ■ General vacuum measurement & control in the fine and rough vacuum range.

Calibration:

Unique Vacuum Solutions offers a convenient recalibration service to help users of vacuum measurement pirani/ thermocouple/ full range gauges to maintain all of their vacuum gauges in Certified and peak condition, regardless of the original manufacturer. All makes of vacuum gauges can also be calibrated / repaired if required.

The calibration certificates are available only on request at additional cost. Pl contact before ordering.

Reviews

There are no reviews yet.

Be the first to review “DPRG-2GH-SP”

Your email address will not be published. Required fields are marked *