Description
FLEXA Digital Pirani Vacuum Gauge FGE-2GH
The UVS Model FLEXA series Vacuum Pirani Gauge Controller displays vacuum pressure as measured from a FG-04 sensor tube. The Model FGE-2GH unit covers the range from 0.001 m.Bar to 20 m.bar, and measures two channels.
Exponential order display from 2.0X101 to 1.0X10-3 mbar
The Advantage Of This Vacuum Gauge FLEXA Series Is The Sensor Tube Has The Built In Zero And Atm Adjustments, So That The Sensor Tube Can Be Used As A Transducer, And Each Sensor Is Factory Calibrated At Sensor Level.
With This 1:1 Replacement Of Sensor With The Display Unit Is Established, And There Is No Dependency On Vacuum Gauge Level Adjustment In Case Of Sensor Replacement.
TECHNICAL SPECIFICATIONS
| Number of sensor channels |
TWO |
| Display Range |
1000 mBar to 0.001mBar. |
| Measuring Range |
20 mBar to 0.001mBar. |
| Units of Display |
m.Bar |
| Vacuum Gauge Head |
FG-04 sensor tube |
| Temp. Range |
+2 to +50 deg. Celsius |
| VAC. Display |
4-digit bright red LED, 14 mm high |
| VAC and ATM Adjust |
adjusted by trim pot at the signal conditioner PCB of the sensor. |
| Process control set points |
NIL |
| Process Control Relays |
NIL |
| Nonvolatile Memory |
NIL |
| Operating Voltage |
universal power supply, input voltages from 90 ~ 264VAC 50/60 Hz |
| Mounting |
¼ DIN 92 x 92 mm (3.62” x 3.62″) |
| Environmental Considerations |
not for use with explosive or corrosive gases |
| Overall dimensions |
92mm X 92mm X 110mm Depth |
| Optional outputs on request |
RS485, 0 -10V Dc analog output (OPTIONAL) |
| Sensor cable |
Standard RJ45 male plugs both ends- 2 mtrs long. Optional additional lengths available on request. |
Features at a Glance : ■ Measurement range 0.001 to 20 mbar ■ Two channel measurement ■ Space saving rugged design- 1/8 DIN console ■ Mounts in any orientation ■ brass body measuring cell with metal-sealed feed through ■ interchangeability of the sensor possible without disturbing the display unit.
Applications: ■ Controlling high vacuum systems ■ Fore vacuum pressure monitoring ■ Safety circuits in vacuum systems ■ General vacuum measurement & control in the fine and rough vacuum range.
Calibration:
Unique Vacuum Solutions offers a convenient recalibration service to help users of vacuum measurement pirani/ thermocouple/ full range gauges to maintain all of their vacuum gauges in Certified and peak condition, regardless of the original manufacturer. All makes of vacuum gauges can also be calibrated / repaired if required.
The calibration certificates are available only on request at additional cost. Pl contact before ordering.