The UVS Model FLEXA series Vacuum Pirani Gauge Controller displays vacuum pressure as measured from a FG-04 sensor tube. The Model FGE-1GH displays vacuum measurements based on thermal conductivity from 0.001 m.Bar to 20 m.bar.
Exponential order display from 2.0X101 to 1.0X10-3 mbar
The Advantage Of This Vacuum Gauge FLEXA Series Is The Sensor Tube Has The Built In Zero And Atm Adjustments, So That The Sensor Tube Can Be Used As A Transducer, And Each Sensor Is Factory Calibrated At Sensor Level.
With This 1:1 Replacement Of Sensor With The Display Unit Is Established, And There Is No Dependency On Vacuum Gauge Level Adjustment In Case Of Sensor Replacement.
|Number of sensor channels
||1000 mBar to 0.001mBar.
||20 mBar to 0.001mBar.
|Vacuum Gauge Head
||FG-04 sensor tube
||+2 to +50 deg. Celsius
||4-digit bright red LED, 14 mm high
|VAC and ATM Adjust
||adjusted by trim pot at the signal conditioner PCB of the sensor.
|Process control set points
||universal power supply, input voltages from 90 ~ 264VAC 50/60 Hz
||¼ DIN 92 x 92 mm (3.62” x 3.62″)
||not for use with explosive or corrosive gases
||92mm X 92mm X 110mm Depth
|Optional outputs on request
||RS485, 0 -10V Dc analog output (optional)
||Standard RJ45 male plugs both ends- 2 mtrs long. Optional additional lengths available on request.
Features at a Glance : ■ Measurement range 0.001 to 20 mbar ■ Space saving rugged design- 1/8 DIN console ■ brass body measuring cell with metal-sealed feed through ■ interchangeability of the sensor possible without disturbing the display unit.
Applications: ■ Controlling high vacuum systems ■ Fore vacuum pressure monitoring ■ Safety circuits in vacuum systems ■ General vacuum measurement & control in the fine and rough vacuum range.
Unique Vacuum Solutions offers a convenient recalibration service to help users of vacuum measurement pirani/ thermocouple/ full range gauges to maintain all of their vacuum gauges in Certified and peak condition, regardless of the original manufacturer. All makes of vacuum gauges can also be calibrated / repaired if required.
The calibration certificates are available only on request at additional cost. Pl contact before ordering.